Igbt Type Power Factor Compensator 220v Static Var Generator 3 Phase 3 Wire/4 Wire 10kvar 20kvar

Short Description:

Noker three phase 200V mini static var generator SVG adopt the three level technology, used for three phase load unbalance, power factor correction, power harmonics filtering, effectively reduce line loss, and prolonging the life of power equipment.

Noker three phase 200V mini Static Var Generator is suitable to form a hybrid Var compensation(HVC) solution with capacitors and reactors Due to its high performance and most cost effective, it is widely used.

Send email to us

Product Detail

Product Tags

Features

Svg static var generator checks the load current through the external CT and performs computing through the external DSP to analyze the reactive content of the load current. After that, it controls the PWM signal generator based on the settings to send control signals to the internal IGBT. In this way, it generates reactive compensation current to implement dynamic reactive power compensation.

1.Three-level inverter technology, high energy efficiency,
2.Integration of load balancing, power factor compensation, harmonics filtering into one module.
3.Built-in RS485 interface to control intelligent capacitor.

4.High-speed response, Overall response time <7.8ms
5.Load balancing and unloading of neutral wires
6.Flexibility and modularity.

Specification

220V SVG checks the load current through the external CT and performs computing through the external DSP to analyze the reactive content of the load current. After that, it controls the PWM signal generator based on the settings to send control signals to the internal IGBT. In this way, it generates reactive compensation current to implement dynamic reactive power compensation.

Network voltage(V)	200/400		690
Network voltage range	-20%--+20%
Network frequency(Hz)	50/60(-10%--+10%)
Scope of compensation	Capacitive and inductive continuously adjustable
CT mounting method	Open or closed loop(recommend in parallel operation)
CT mounting position	Grid side/load side
Response time	10ms or less
Connection method	3-wire/4-wire
Overload capacity	110%Continuous operation, 120%-1min
Circuit topology	Three-level topology
Switching frequency(khz)	20kHz
Redundancy	Any unit can become a stand-alone unit
Unbalance governance	Available
SVC	Available
Display	No screen/4.3/7 inch screen(optional)
Capacity(kVar)	25、50、75、100、150		50、100
Harmonic range	2nd to 50th order
Communication port	RS485
	CAN protocol, RJ45 interface, for communication between modules
Noise level	＜56dB Max to ＜69dB(depending on module or load conditions)
Mounting type	Cabinet	Wall-mounted, rack-mounted, cabinet
Altitude	Derating usage＞1500m
Temperature	Operating temperature: -45℃--55℃, derating usage above 55℃
	Storage temperature: -45℃--70℃
Humidity	5%--95%RH, non-condensing
Protection class	IP20
Design/approvals	EN 62477-1(2012), EN 61439-1(2011)
EMC	EN/IEC 61000-6-4, Class A
Certification	CE, CQC

Product display

The 220v mini static var generator adopts the hardware structure of DSP+FPGA, and the components are of high quality. Thermal simulation technology is used for thermal design of the system, and multi-layer PCB circuit board design ensures reliable isolation of high and low pressure, which provides guarantee for system safety.

Application

Where there is a low-voltage transformer installed and next to large electrical equipment should be equipped with reactive power compensation devices svg static var generator(this is the provisions of the national power department), especially those with low power factor industrial mines, enterprises, residential areas must be installed. Large asynchronous motors, transformers, welding machines, punches, lathes, air compressors, presses, cranes, smelting, steel rolling, aluminum rolling, large switches, electric irrigation equipment, electric locomotives, etc. In addition to incandescent lighting in residential areas, air conditioning, refrigerators, etc., are also reactive power consumption objects that can not be ignored. The rural electricity situation is relatively bad, most areas lack of power supply, voltage fluctuation is very large, power factor is especially low, installing compensation equipment is an effective measure to improve the power supply situation and improve the utilization rate of electric energy. 220v mini static var generator must the most ideal reactive power compensation device.

1.All types of industrial installations
2.Equipment using variable speed drive (VSD)
3.arcing equipment: electric arc furnace (EAF), ladle furnace (LF), and arc welding machine
4.Switching power supply: computer, TV, photocopiers, printer, air conditioner, PLC
5.UPS system
6.Data center
7.Medical equipment: MRI scanner, CT scanner, X-ray machine, and linear accelerator
8.Lighting equipment: LED, fluorescent lamp, mercury vapor lamp, sodium vapor lamp, and an ultraviolet lamp
9.Solar inverter and wind turbine generators

Customer service

1. ODM/OEM service is offered.

2. Quick order confirmation.

3. Fast delivery time.

4. Convenient payment term.

At present, the company is vigorously expanding overseas markets and global layout. We are committed to becoming one of the top ten export enterprises in China’s electrical automatic product, serving the world with high-quality products and achieving a win-win situation with more customers.