Noker Triple Phase Scr Power Controllers For Electrical Resistance Heaters 100a 200a 300a

Short Description:

NK30E series power controller is based on many years of application experience in the electric heating industry, a high-end power regulator product with optional multi-function card, extensible analog output, keyboard external induction, MODBUS TCP/IP, Profibus DP, true RMS control and other functions.

Power controller has been widely used in float glass production line, monocrystalline silicon, polysilicon heating and other electric heating occasions, and has been highly appraised by customers.


Product Detail

Product Tags

Video

Features

Scr power regulator, also known as scr power controller is used to control power delivery. They are designed to vary the ac voltage across the resistive&inductive loads. The thyristor power controllers provide a smooth way of power delivery to load. Unlike conactors, not have any electromechanical movemen. Scr power regulator includes the back to back connect silicon rectifier(scr), trigger pcb board, current transformers, temperature transformer. By the trigger pcb board to control the thyristor by phase angle&zero cross burst two models. The current transformers detect the three phase current, as the constant current control and to be the current protection. The temperature transformers detect the heatsink temperature to protect the Scr to be safe.

1.Built-in High-performance, Low-power Microcontroller
2.Peripheral Features
2.1.Support 4-20mA and 0-5/10V(potentiometer) two given
2.2.Two switch inputs
2.3.Wide Range Of Primary Loop Voltages( AC260- 440V)
3.Efficient cooling solution such small size, light weight

4.Practical alarm function
  Phase failure, Overheat, Overcurrent, Load break
5.One relay output
3 A, A C 2 5 0 V
3 A, D C 3 0 V
6.To facilitate centralized control RS485 communication

vava (4)

Specification

Item Specification
Power supply Main power: AC260--440v, control power: AC160-240v
Power frequency 45-65Hz
Rated current 25a---800a
Cooling way Forced fan cooling
Protection Phase lose, over current, over heat, overload, load lose, frequency fault
Analogue input Two analogue input, 0-10v/4-20ma/0-20ma
Digital input Two digital input
Relay output One relay output
Communication Modbus communication
Optional card DA output, remote display, Profibus-DP, Modbus TCP/IP, TRMS
Trigger mode Phase shift trigger, zero-crossing trigger
Accuracy ±1% 
Stability ±0.2%
Environment Condition Below 2000m. Rise the rate power when the altitude is more than 2000m.Ambient Temperature: -25+45°CAmbient Humidity: 95%(20°C±5°C)Vibration<0.5G

Terminals

NK30E scr power regulator terminal

Thyristor scr power regulator with a wide power supply rang from 260-440v, support 0-10v/4-20mA analogue input, 2 digital input, modbus communication can be used to control the scr power regulator remotely. If you need with PID temperature module, it is optional. You need not add additional temperature module anymore.

Keyboard operation

scr power regulator panel

The three phase thyristor scr power regulator adopts 5-bit digital tube display, the eye-catching digital tube display brightness is high, good reliability. Can display all parameters and status of the power regulator, fault information. The humanized design is very convenient for the power regulator field data setting and status display.

Dimension

scr power regulator

The shell of the thyristor scr power regulator is made of high quality cold rolled steel plate, the surface is treated with anti-oxidation, and the powder is treated with electrostatic spraying, which has the characteristics of high temperature resistance and anti-oxidation. The power regulator has compact structure design, small volume and light weight.

Application

noker=thyristor_power-controller_pcb_board
scr_power_regulator_test
cof
scr_power_regulator_application

Some applications scr power regulator widely be used:

1. Aluminium melting furnaces;

2. Holding furnaces;

3. Boilers;

4. Microwave dryers;

5. Multi-zone drying and curing overs;

6. Plastic injection moulding requiring multi-zone heating for mainfold moulds;

7. Plastic pipes and sheets extrusion;

8. Metal sheets welding systems;

Customer service

1. ODM/OEM service is offered.

2. Quick order confirmation.

3. Fast delivery time.

4. Convenient payment term.

At present, the company is vigorously expanding overseas markets and global layout. We are committed to becoming one of the top ten export enterprises in China’s electrical automatic product, serving the world with high-quality products and achieving a win-win situation with more customers.

Noker SERVICE
Freight

  • Previous:
  • Next: