Three Phase Hybrid Solar Water Pump Inverter 1.5kw-500kw

Short Description:

Solar pump system, consisting of solar array, solar pump inverter, Ac water pump and tank, uses solar cell as power supply to directly take water from deep well, rivers, lakes and other water sources through the water pump.

The solar array absorbs solar radiation and converts it into electric energy to provide power supply for the whole system. The solar pump inverter converts the Dc output by the solar array into Ac and drives the water pump ; in addition, it adjusts the output voltage and frequency according to the sunshine intensity in real time to realize maximum power point tracking and to maximize the use of solar energy. When the sunshine intensity is low, the solar pump system can switch to grid power for complementary power supply.


Product Detail

Product Tags

Features

The hybrid solar water pump inverter directly obtains DC power from the solar panel and converts it into AC power to supply the water pump. The maximum power point tracking (MPPT) and the maximum use of solar energy can be obtained by adjusting the real-time output frequency according to the intensity of sunlight. Solar photovoltaic water pump system consists of 3 parts: 1. Solar panels, 2. Solar water pump inverter, 3. Water pump.

1.The system automatically starts in the morning and stops in the evening. It can run perfectly whenever there is sunshine, with no need of back-up battery.

2.Applicable to and suits all applications require water pumps.

3.Compatible with all types of solar panels and Ac pumps.

4.Remote monitoring for real time operation status and switching on/off by GPRS.

5.Good performance even in cloudy weather.

6.In the long run, the return on investment is much higher than diesel generators.

7.Equipment with perfect protection, requires no man to be on duty, runs fully automatically.

Specification

Item Technical Index Specification
Input Input DC voltage 200--450V(220V pump)300--900V(380V pump)
Output Output voltage 0--rated input voltage
  

 

 

 

 

 

 

Control features

Control mode V/F controlSensorless vector control
Operation command mode Keypad controlTerminal control

Serial communication control

Frequency setting mode MPPT automatic regulationCVT(constant voltage)
Overload capacity 150% 60s, 180% 10s, 200% 3s
Starting torque 0.5Hz/150%(SVC), 1Hz/150%(V/f)
Speed adjustment range 1:100(SVC), 1:50(V/f)
Speed control precision ±0.5%(SVC)
Carrier frequency 1.0--16.0kHz, automatically adjusted according to temperature and load characteristics
Frequency accuracy Digital setting: 0.01HzAnalog setting: maximum frequency*0.05%
Torque boost Automatically torque boost, manually torque boost: 0.1%--30.0%
V/F curve Three types: linear, multiple point and square type(1.0 power, 1.4 power, 1.6 power, 1.8 power square)
Acceleration/deceleration mode Straight line/S curve; four kinds of acceleration/deceleration time, rang: 0.1s--3600.0s
Control function Over-voltage&over-current stall control Limit current&voltage automatically during the running process, prevent frequent over-current&over-voltage tripping
Fault protection function Up to 30 fault protections including over-curent, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running status during failure&has fault automatic reset function
Special functions for solar pump system MPPT(Maximum power point tracking), dry tap protection, water level sensor failure protection, full water warming, weak sunshine warming, full automatic running, automatic switching of PV input and other power inputs
Input/output terminals Input terminals Programmable DI: 3 on-off inputs1 programmable AI: 0-10V or 0/4--20mA
Output terminals 2 relay outputs
Communication terminals Offer RS485 communication interface, support MODBUS-RTU communication protocol
Human machine interface LED display Display frequency setting, output frequency, output voltage, output current, etc.,
Multifunction key QUICK/JOG key, can be used as multifuntion key
Environment  Ambient temperature -10℃---40℃, derated 4% when the temperature rise by every 1℃(40℃--50℃)
Humidity 90%RH or less(non-condensing)
Altitude  ≤1000M,output rated power, >1000M, output derated
Storage temperature  -20℃---60℃

Accessories

sdtrfd (1)
sdtrfd (2)

Application

sdtrfd (3)
sdtrfd (4)

The solar pumping inverter system uses the durable energy from the sun, works at sunrise, and rests in the sun, without personnel care, without fossil energy, without comprehensive power grid, independent operation, safe and reliable. It can be used with drip irrigation, sprinkler irrigation, seepage irrigation and other irrigation facilities to effectively solve the problem of cultivated land irrigation, improve production, water saving and energy saving, and greatly reduce the input cost of traditional energy and electricity. Therefore, it has become the most effective way to use clean energy to replace fossil energy, and has become a new energy and new technology application product of the global "food problem" and "energy problem" comprehensive solution.

Customer service

1. ODM/OEM service is offered.

2. Quick order confirmation.

3. Fast delivery time.

4. Convenient payment term.

At present, the company is vigorously expanding overseas markets and global layout. We are committed to becoming one of the top ten export enterprises in China’s electrical automatic product, serving the world with high-quality products and achieving a win-win situation with more customers.

Noker SERVICE
Freight

  • Previous:
  • Next: